FLAT SOUND FROM LAPTOPS TO ANALOG CONSOLES
*Most studios do not have a truly flat frequency response. They have modal dips and peaks that even software can’t even out.
The X1 fixes this with room independance and flat tuning, allowing your monitoring to rival the flattest studios in the world.
No room treatment required. The X1 individual calibration follows you to any device. Plugin independent.
Individually calibrated –
using the power of AI processing
Every X1 unit is individually tested and calibrated to fix any frequency response deviations from material and acoustics. The AI analytical power enables finetuning the X1 with another layer of precision.
Plugin & direct EQ support
Run the USC calibration as a plugin on your laptop or as direct EQ values on any hardware e.g. RME Total Mix, UA Console, MOTU Control, Neumann Monitor Mission and any DSP enabled audio interface or analog EQ strips.
Studio, FOH and car emulations
The USC II plugin features studio, front-of-house (FOH), and car emulations, expertly preset by OLLO and powered by Realphones technology.
Stereo, spatial and Harman targets
The X1 default calibration is optimized for stereo mixing and translation. With just one click, you can switch to spatial audio mixing in binaural mode or use the popular Harman target to cross-check your mix.
*Available only with the USC II plugin.
TECHNICAL SPECIFICATIONS
| Feature | Specification |
|---|---|
| Style | Open back, Over the ear |
| Frequency range* | 15 Hz – 22 kHz sweep 1/3 oct p-p range 9.8 dBSPL +/- 1dB |
| SPL/sensitivity* | 101 dBSPL @ 1kHz RMS3dB @ 0 dBu |
| Impedance* | ~32 ohm – works with all devices |
| Speaker type and size | Dynamic, 50mm |
| Magnet type | Neodymium |
| Transducer type | Dynamic |
| Membrane | Composite Pu+PET patented pattern |
| THD & 2nd* | <0.05% & <0.02% @ 94 dB SPL @ 1kHz |
| Ear pads diameter in/out | 60/90mm |
| Ear pads material | Acoustic foam with perforated artificial leather and velour |
| Ear cups material | American walnut |
| Headband material | Stainless steel and silicone |
| Cable termination | Detachable 2 meters long Y 2.5mm mini jack |
| Connector | 3.5mm jack with an adapter to 6.3mm jack |
| Calibration | Unit Specific Calibration included |
| Weight ex. cable | 390 g (0.8 lb) |
| International warranty | 5-year limited warranty |
| Trial period – Money back | 90 days from delivery date when purchased directly from OLLO Audio |
| Product classification | EN 60268-7-IEC-DCLO-32R0-2 |
| *data capturing standard | EN 60268-7 with IEC 60318-1, sweep signal, output 1ohm, 100Hz-10kHz tolerance +/- 1dB, USC calibration disabled |
THE ANATOMY OF SOUND
Speakers
- DynamicNeodymium speaker
- 50mm diameter, composite Pu+PET membrane with patented pattern
- 32 Ohms
- 101 dBSPL @ 1kHz RMS3dB @ 0 dBu 1ohm output – that makes them work with smart devices too
- Left / right matched speakers (+/-1dB SPL tolerance, sweep, range 100Hz-10kHz in the free field at 1cm distance)
- Replaceable using home tools
Acoustics
- Earpads with outer diameter of 95mm (3.75in), an inner diameter of 57.5mm (2.25in) and a depth of a 20mm (0.8in), +/-2.55mm. Made of artificial leather and velour.
- THD & 2nd <0.05% & <0.02% @ 94 dB SPL @ 1kHz with sweep source measured with IEC 60318-1 ear simulator.
- Variation in frequency response in band from 5Hz to 22kHz ~9.8 dBSPL +/- 1dB SPL using sweep and IEC 60318-1 ear simulator.
- Front-to-back air pressure equalization controlled with Saati flow resistor 3.2Ohms(²)/1cm².
- Ex-centric and angled speaker in a conical radiation chassis with an optimal sound stage for best translation of instrument positions in stereo or immersive formats.
- Frequency response calibrated for best translation of balance and artificially placed objects in stereo or downmixed (binaural) immersive projects.
Headband
- Clamping force set to achieve target frequency response with industry-standard bitragional diameter of 14.3cm (KEMAR) on IEC60318-4 ear simulator.
- Artificial leather strap and powder coated stainless spring steel are both replaceable using home tools.
- 360 earcups rotation and self adjusting strap for quick and easy head size adjustments.
Cable
- 2m long (6.5ft) and easy detachable silicone cable with enameled OFC core to ensure minimal signal distortion and long life.
- Screw-on adapter from 3.5mm to 6.3mm jacks (1/8 to 1/4 inch)
USCII Calibration
Calibration is the “final mile” in delivering perfectly flat frequency response. All our headphones are very well tuned out of the box and measured in quality control. By measuring every individual unit we can capture any deviations in sound quality that comes from material tolerances for a specific unit. Calibration fixes these and frequency response beyond what’s possible with acoustic design alone.Unit specific calibration can achieve an incredibly low tolerance of approximately ~1dB to the selected frequency target. For illustration purpose, generic software calibrations like Sonarworks Sound ID or Waves NX can only achieve about ~3dB.Unit Specific Calibration II (USC II) includes a software plugin (powered by Realphones) and a calibration data file generated using the power of AI processing. The plugin comes in AU, VST and AAX format for Mac and Win users and is also available in standalone version. The calibration data file is in XPS format that enables manual export of exact EQ values to any 3rd party EQ plugin or DSP enabled hardware; for example: RME TotalMix, Neumann Mission Control, UA console and others.Calibration includes:
- OLLO USC II plugin (AU, VST, AAX)
- OLLO USC II standalone app (Mac and Win)
- USC II calibration data file compatible with Realphones and Waves Nx
- Open data file for easy export to any 3rd party EQ or DSP enabled hardware
Reviews
There are no reviews yet.